Re: [MV] Air release kit for air tanks of a M35A2.

Go to your local heavy truck parts/dealer and buy em over the parts counter
all day. they are a every day common item $10-15.

Jim



At 01:04 PM 7/5/2004, [email]AVarvarigo@aol.com[/email] wrote:[color=blue]
>Hi all. I believe, I asked this some time back, but as I am getting older
>I am losing my mind.
>Anyhow. Going through my books the other day, I was reminded that there
>was a kit that I believe the military used on the above, with cables
>coming out of the side of the truck to a holding plate bolted to the
>frame. Those pulled would release the air off of the tanks through the use
>of quick release valves. I was wondering if anyone would happen to have
>said kit and willing to part with it.
>Thank you all,
>Tony V.
>
>===Mil-Veh is a member-supported mailing list===
>To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
>To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
>To reach a human, contact <ack@mil-veh.org>[/color]

James Shanks
[email]n1vbn@arrl.net[/email]
1998 IMZ 8.103
1984 H-D FLHT-C



===Mil-Veh is a member-supported mailing list===
To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
To reach a human, contact <ack@mil-veh.org>

I bought a set from "Truck Pro" for my M211. They cost about $5.00 Ea
----- Original Message -----
From: "James Shanks" <n1vbn@arrl.net>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Thursday, July 08, 2004 5:13 AM
Subject: Re: [MV] Air release kit for air tanks of a M35A2.

[color=blue]
> Go to your local heavy truck parts/dealer and buy em over the parts[/color]
counter[color=blue]
> all day. they are a every day common item $10-15.
>
> Jim
>
>
>
> At 01:04 PM 7/5/2004, [email]AVarvarigo@aol.com[/email] wrote:[color=green]
> >Hi all. I believe, I asked this some time back, but as I am getting older
> >I am losing my mind.
> >Anyhow. Going through my books the other day, I was reminded that there
> >was a kit that I believe the military used on the above, with cables
> >coming out of the side of the truck to a holding plate bolted to the
> >frame. Those pulled would release the air off of the tanks through the[/color][/color]
use[color=blue][color=green]
> >of quick release valves. I was wondering if anyone would happen to have
> >said kit and willing to part with it.
> >Thank you all,
> >Tony V.
> >
> >===Mil-Veh is a member-supported mailing list===
> >To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> >To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> >To reach a human, contact <ack@mil-veh.org>[/color]
>
> James Shanks
> [email]n1vbn@arrl.net[/email]
> 1998 IMZ 8.103
> 1984 H-D FLHT-C
>
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>[/color]



===Mil-Veh is a member-supported mailing list===
To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
To reach a human, contact <ack@mil-veh.org>