[MV] Deuce Wrecker

Can any of the 3 or 4 of you that have a deuce wrecker do me a favor? The
back of my boom has some damage. I need a pic of the back, from behind of the
boom where the sheave is. It looks like this area was cut out oe torn by the
cable on mine.
Thanks,
Kenny


===Mil-Veh is a member-supported mailing list===
To unsubscribe, send e-mail to <mil-veh-off (AT) mil-veh (DOT) org>
To reach a human, contact <ackyle (AT) gmail (DOT) com>
Visit the searchable archives at [url]http://www.mil-veh.org/archives/[/url]

Kenny, If the Boom isn't bent or cracked, then welding a 1/2 "thick plate
where the rub through should take care of it and still clear the rollers on
the main section of the boom sounds like the cable may have jumped the
sheave or a bolt fell out of the spindle and let the cable lay on the top of
the boom and caused the damage. Just my thoughts .
----- Original Message -----
From: <Recovry4x4 (AT) aol (DOT) com>
To: "Military Vehicles Mailing List" <mil-veh (AT) mil-veh (DOT) org>
Sent: Saturday, December 24, 2005 2:30 PM
Subject: [MV] Deuce Wrecker

[color=blue]
> Can any of the 3 or 4 of you that have a deuce wrecker do me a favor? The
> back of my boom has some damage. I need a pic of the back, from behind of
> the
> boom where the sheave is. It looks like this area was cut out oe torn by
> the
> cable on mine.
> Thanks,
> Kenny
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to <mil-veh-off (AT) mil-veh (DOT) org>
> To reach a human, contact <ackyle (AT) gmail (DOT) com>
> Visit the searchable archives at [url]http://www.mil-veh.org/archives/[/url]
> [/color]



===Mil-Veh is a member-supported mailing list===
To unsubscribe, send e-mail to <mil-veh-off (AT) mil-veh (DOT) org>
To reach a human, contact <ackyle (AT) gmail (DOT) com>
Visit the searchable archives at [url]http://www.mil-veh.org/archives/[/url]