Re: [MV] Plasitc fuel line for M35

Thanks, Guys, for the answers to my question. As always, this list is the best!

I am off to the hardware store now.
Later -

Mark



Quoting jonathon <jemery@execpc.com>:
[color=blue][color=green]
> >I had started my Deuce tonight in anticipation of a nice ride around the
> >countryside. I went into the house to get my wife, and when we came back out[/color]
> to[color=green]
> >the truck, something was dripping; it turned out to be fuel. There are 2 of
> >those plastic fuel hoses that had been rubbing together, and one had formed[/color]
> a[color=green]
> >pinhole leak. [/color]
>
> I started mine up the other day to back it out and pull it back in but over
> further to work in the brakes. Noticed I had a nice steam of liquid out and
> back on the drive, looked under and saw fuel dripping all over, opened side
> panel and saw fuel running down all over the turbo. Turns out some animal
> had perferated the plastic return tube from the flame primer.
>
> [color=green]
> >Where does one get that type of hose and fittings?[/color]
>
> Have not taken the fitting off to determine the type/brand, but as far as I
> can see the tubing is just nylon tubing.
>
> good luck,
>
> je
>
> [/color]




===Mil-Veh is a member-supported mailing list===
To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
To reach a human, contact <ack@mil-veh.org>